21 Aerator Pump Manufacturers in 2024
This section provides an overview for aerator pumps as well as their applications and principles. Also, please take a look at the list of 21 aerator pump manufacturers and their company rankings. Here are the top-ranked aerator pump companies as of April, 2024: 1.Xylem Inc., 2.KLM Solutions LLC, 3.TSURUMI MANUFACTURING CO., LTD..
Table of Contents
What Is an Aerator Pump?
An aerator pump is a device designed to introduce air into a liquid. Its primary application is in the aeration process of sewage treatment, where aerobic microorganisms are employed. The purpose is not just to transport air but to enhance its dissolution into the liquid by compressing it further. Many products mix the air with water before releasing it as microbubbles, facilitating the efficient dissolution of oxygen as the bubbles rise gently through the liquid.
Uses of Aerator Pumps
Aerator pumps find essential usage in sewage treatment facilities, industrial waste treatment plants, and various sewage treatment processes. They serve as integral components within aeration tanks responsible for treating sewage and other substances using aerobic microorganisms. Their primary function is to supply oxygen to the aeration tank.
When selecting aerator pumps, several factors must be considered, including discharge volume, discharge pressure, mixing range, water depth to be handled, power consumption, and size. Many products incorporate motor parts designed for underwater use, potentially requiring fewer noise mitigation measures.
Principle of Aerator Pumps
This section outlines the fundamental operation principle of aerator pumps. An aerator pump typically consists of an air inlet, compression section, mixing section, and outlet. With the exception of the suction inlet, all these components are often submerged underwater. The compression section utilizes an impeller, blower, or compressor, commonly powered by a 3-phase power supply. In the mixing section, measures are in place to prevent sewage-related clogging through the use of highly sealed and secure structures.
During operation, air is drawn in through the inlet by a high-speed rotating impeller or similar device within the compression section. At this point, the air pressure is increased beyond the water pressure. The depth of the water, the impeller's speed, and its design all impact the air compression process. The compressed air is then finely dispersed into minute bubbles within the mixing section using a diffuser plate. Subsequently, the aerated air is expelled through the outlet. The outlet is often tapered, allowing the pump to distribute air over a wider area while maintaining a single directional flow.
List of 21 Aerator Pump Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Denmark
- Italy
- Japan
- United Kingdom
-
-
-
Xylem Inc.
Aerator
Manufacturer Overview
Xylem Inc. was incorporated in 2011 and is headquartered in Washington, District of Columbia. Xylem engages in the design, manufacture, and servicing of engineered products and solutions for the water and wastewater applications across global markets. Xylem operates through three segments: water infrastructure, applied water, and measurement & control solutions. Xylem’s water infrastructure segment offers numerous products such as water pumps, filtration, disinfection, and biological treatment equipment. Xylem’s applied water segment distributes pumps, valves, heat exchangers, controls, and dispensing equipment systems. Xylem’s measurement & control Solutions segment offers devices such as smart meters, networked communication devices, data analytics, test equipment, controls, sensor devices, and software and managed services.
-
-
-
-
-
WesTech Engineering, LLC.
Cascade Aerator
Manufacturer Overview
WesTech Engineering, LLC., founded in Salt Lake City, Utah, in 1972 is a manufacturer of water and wastewater treatment process equipment for mineral, industrial, and municipal applications. The company's product portfolio includes water filtration systems, including sand filters, multimedia filters, and activated carbon filters, Reverse Osmosis (RO) Systems, water softening systems that utilize ion-exchange technology to reduce the hardness of water, clarifiers and settlers are engineered to separate solids from liquids, and chemical dosing systems. Their products are used in industries such as Food and Beverage, Pharmaceutical and Biotechnology, and Chemical and Petrochemical.
-
-
-
-
-
Coastal Hydraulics, Inc.
Johnson 28702 Aerator Pump - Basspiratior II
Manufacturer Overview
Coastal Hydraulics Inc., established in 1993, is headquartered in San Diego, California, USA, and is a manufacturer of hydraulic systems and components. The company specializes in crafting tailored hydraulic solutions for aerospace, maritime, construction, and industrial sectors. Its product line includes custom hydraulic power units, cylinders, valves, and specialized systems. It has received awards such as the 2016 Industry Innovator Award and the 2019 Engineering Excellence Award. It holds certifications like ISO 9001 for quality management.
-
-
-
-
-
SEPTIC SOLUTIONS, INC.
Pond Aeration Pumps
Manufacturer Overview
Septic Solutions, Inc., founded in 1989 in Dieterich, Illinois, USA, is a manufacturer of a comprehensive range of aerobic septic system parts, septic tank parts, and septic supplies. The company is ISO 9001 certified, and its product varieties include advanced components for aerobic septic systems, ensuring efficient and environmentally friendly waste management solutions. The features of its offerings include durability, consistency, and compliance with industry standards, resulting in the longevity and effectiveness of septic systems. It serves several industries, including residential, commercial, and industrial sectors, with stable solutions for sewage treatment and disposal.
-
-
-
-
-
Runnings, Inc.
Engel Coolers 2x2 Aerator Pump
Company Overview
Runnings Inc., founded in 1947 and headquartered in Marshall, Minnesota, is a retail company specializing in selling automotive, sporting goods, farm supplies, and other merchandise. The company offers various merchandise in 57 stores across 8 states and online. Their product portfolio includes sporting goods, tools, housewares, pet and animal supplies, and more. They also sell firearms and automotive goods. With a wide selection of brands and in-store and online shopping options. Runnings serves customers nationwide with an extensive selection of everyday essentials.
-
-
-
-
-
Pentair Aquatic Eco-Systems, Inc.
Aeration & Oxygenation
Distributor Overview
Pentair Aquatic Eco-Systems is a supplier of commercial Aquaculture systems and equipment in Florida. The company offers tanks and pumps and products for Aeration & Oxygenation such as air valves and compressors, Aquatic feed and feeders, Chillers and Heaters, Cleaning, Field and Hatchery supplies. The tanks are available in various materials and sizes like Fiberglass tanks, Polyethylene tanks, storage, and insulated and sealed tanks as well. They largely cater to the commercial Aquaculture industry providing all the necessary equipment.
-
-
-
-
-
Aasted ApS
Auxiliary Equipment
Manufacturer Overview
Aasted ApS was founded in 1917 and is headquartered in Copenhagen is a manufacturer of production solutions within the chocolate, bakery, and confectionery industries. The company offers an extensive equipment catalog including depositors, moulders, coolers, enrobers, and temperers for chocolate production. These equipment are instrumental in achieving precise chocolate tempering for quality chocolate bars and pralines, uniform coating of confectionery items using enrobing machines, intricate chocolate shape creation through molding equipment, and efficient bakery machinery for consistent production of bread and pastries.
-
-
-
-
-
OLI SpA
Flow Aids
Manufacturer Overview
OLI SpA is an Italian ISO 9001 certified manufacturer of industrial vibration products founded in 1961 in Medolla, Modena. The company produces various electric and industrial vibrators, frequency converters, and concrete consolidation equipment for removing air bubbles, such as in compacting fresh concrete. These include circular motion vibrating screens, bin activators for silos, and automatic block machines. The company's products chiefly serve clients in the feed and food, plastics, and construction industries.
-
-
-
-
-
NITTO KOHKI CO.,LTD.
MEDO BLOWER
Manufacturer Overview
NITTO KOHKI CO., LTD., founded in 1956, is a Japanese manufacturer and supplier headquartered in Ota-ku, Tokyo, specializing in compressors and pumps, door closers, power and machine tools, as well as quick connect couplings. The company’s CUPLA series of quick connect couplings caters to diverse industries including automotive, chemicals, electronic or mechanical products, food manufacturing, and semiconductors. The "delvo" series features electric screwdrivers used in transportation equipment manufacturing. The company’s MEDO BLOWER line presents power-saving blowers for applications like residential septic tanks, cultivation, fluid agitation, and live fish maintenance. Additionally, the company’s door closers are installed in medical facilities and transportation.
-
-
-
-
-
ShinMaywa Industries, Ltd.
submersible mixer
Manufacturer Overview
ShinMaywa Industries, Ltd. was established in 1949 and headquartered in Hyogo, Japan is a manufacturer of aircraft, special purpose trucks, water treatment equipment, and wire processing systems among others. The company offers an extensive and diversified product portfolio including aircraft passenger boarding bridges, industrial machinery, thin films and surface modification, thin film coating systems, and built-in DD direct drive motors among others. These products and services are instrumental in enhancing and sustaining environmental amenities, delivering advanced processing and treatment capabilities, providing enhanced surface modifications, and contributing to the development of urban environments in our motorized society.
-
-
-
-
-
TSURUMI MANUFACTURING CO., LTD.
Submersible Aerators
Manufacturer Overview
TSURUMI MANUFACTURING CO., LTD., located in Osaka, Japan, has been a manufacturer and supplier of pumps, environmental equipment, and peripheral equipment since 1948. The products are water pumps, liquid ring pumps, portable generators, liquid level sensors, and water treatment equipment such as scum skimmers, submersible aerators, automatic bar screens, screw-press dehydrators, and floating decanters. The ISO 9001-certified company serves livestock farming, wastewater treatment, power plant, pumping stations, and industrial fields. The company provides after-sale services such as installation, construction of facilities, secondhand sale, and leasing of fixed assets.
-
-
-
-
-
Astim
AERATION
Manufacturer Overview
Astim, established in 1980 and headquartered in Kocaeli, Turkey, is a manufacturer and supplier of industrial liquid and gas mechanical equipment and machinery. The company's products include containerized treatment plants, pressurized tanks, and water flow control equipment. These products are used for wastewater treatment systems, water intake structures, and sludge treatment. It welcomes inquiries for custom turnkey systems, and its services include installation and maintenance. It has completed large-scale projects for WTE Germany, Strabag Austria, and Waterleau Belgium.
-
-
-
-
-
BPS Direct, L.L.C.
BILGE & AERATOR PUMPS
Manufacturer Overview
BPS Direct, L.L.C., founded in 1972 in Springfield, Missouri, USA, is a manufacturer of gear for hunting, fishing, boating, camping, and various outdoor activities. The company manufactures a broad range of products, including outdoor apparel, camping equipment, fishing gear, and hunting accessories. It holds ISO 9001 certification, and the pros of its gear encompass durability, functionality, and advanced features tailored to outdoor enthusiasts. It serves a broad customer base engaged in outdoor pursuits, including hunters, anglers, campers, and boating enthusiasts.
-
-
-
-
-
KLM Solutions LLC
AERATION PUMPS
Manufacturer Overview
KLM Solutions LLC, established in 2003 in Muscatine, Iowa, USA, is a manufacturer of pond and industrial algae control products. The company holds ISO 9001 certification and offers a broad range of algae control solutions, including algaecides, herbicides, and environmentally friendly treatments. The advantages of its products include effective algae elimination, water quality improvement, and ecosystem preservation. These solutions find applications across various industries, including agriculture, aquaculture, wastewater treatment, and industrial water systems, providing clients with tools to manage and maintain water ecosystems.
-
-
-
-
-
CRI-MAN S.p.A.
Submersible chopper pumps with aerator
Company Overview
CRI-MAN S.p.A. is an Italian manufacturer and distributor of industrial processing machines that was established in Correggio, Reggio Emilia in 1974. The company’s product portfolio includes screw press separators for dividing solid and liquid slurry fractions, chopper pumps for handling fibrous or solid materials, and mixers for homogenizing liquid in lagoons or tanks. It also offers spare parts and accessories such as couplings, hoses, and fittings. The company’s products are commonly used in the biofuels, livestock, and industrial processing sectors, including by companies such as Agricola San Martino and Enerambiente.
-
-
-
-
-
North Ridge Pumps
HCP J SERIES EJECTOR/AERATOR SUBMERSIBLE PUMP
Company Overview
North Ridge Pumps, established in 1988 with facilities in the United Kingdom, is an independent manufacturer and distributor of industrial pumps. The company's products include pump types that range from standard centrifugal pumps and multistage pumps to immersed and overhung solid handling pumps. North Ridge Pumps' equipment is used for the handling of fluids including freshwater, seawater, glycols, heavy oils, foods, and chemicals. The company also offers custom design, engineering, and production of application- and specification-specific industrial pumps, as well as full maintenance services.
-
-
-
-
-
TERAL INC
Blower
Company Overview
Teral Inc., founded in 1918 and headquartered in Fukuyama, Japan, is a manufacturer and seller of pumps, fans, and environmental systems. Its product portfolio includes air conditioning fans, dust collectors, garbage disposal systems, coolant pumps, and firefighting pumps. The products are used in several industries, including fishery, livestock, agriculture, automotive, and shipbuilding. The company is ISO 9001 and ISO 14001 certified and began manufacturing air blowers under the Kyokuta brand in 1956. In 1971, it started developing and selling total heat exchangers, and in 1975, it developed the industry’s first water supply unit.
-
-
-
-
-
West Marine
500 GPH 90° Cartridge Aerator Pump
Company Overview
West Marine, a company founded in 1968, based in Watsonville, California, USA, is a supplier of boating, sailing, fishing, and paddling products. The company offers various products such as boat parts, marine electronics, safety gear, fishing equipment, water sports gear, kayaks, paddleboards, and outdoor living products. It also offers services, such as boat repair, rigging, and maintenance. It is a member of the National Marine Manufacturers Association (NMMA) and the Boating Industry Association (BIA). It’s devoted to environmental stewardship and is a supporter of the Blue Future Foundation, a non-profit organization that works to protect the marine environment.
-
-
-
-
-
-
-
S.C.M. Tecnologie s.r.l.
Aeration
-
-
-
-
Distributor Overview
Pentair is a supplier of sustainable water solutions since 1966 and is based in St. Paul, Minnesota. The company serves the residential community by providing equipment for pools and spas and products for water softening and filtration to run through houses. The business industry benefits from the products that include commercial pool and spa equipment such as chemical controllers, heaters, lightings, and also valves and pumps for water supply as well as for water disposal. The Agricultural products include irrigation equipment and as for the Oil & Gas industry, there is the Biogas upgrading, CO2 Technologies, and much more.
-
-
Aerator Pump Manufacturer Ranking
*Including some distributors, etc.Ranking as of April 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | KLM Solutions LLC |
12.3%
|
| 2 | TSURUMI MANUFACTURING CO., LTD. |
12.3%
|
| 3 | Xylem Inc. |
10.5%
|
| 4 | BPS Direct, L.L.C. |
8.8%
|
| 5 | WesTech Engineering, LLC. |
8.8%
|
| 6 | Pentair Aquatic Eco-Systems, Inc. |
8.8%
|
| 7 | SEPTIC SOLUTIONS, INC. |
7.0%
|
| 8 | Coastal Hydraulics, Inc. |
5.3%
|
| 9 | Runnings, Inc. |
5.3%
|
| 10 | NITTO KOHKI CO.,LTD. |
5.3%
|
Derivation Method
The ranking is calculated based on the click share within the aerator pump page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Pentair: 11,250
- ShinMaywa Industries, Ltd.: 5,934
- TSURUMI MANUFACTURING CO., LTD.: 1,132
Newly Established Company
- North Ridge Pumps: 1998 (26 years ago)
- SEPTIC SOLUTIONS, INC.: 1989 (35 years ago)
- WesTech Engineering, LLC.: 1973 (51 years ago)
Company with a History
- TSURUMI MANUFACTURING CO., LTD.: 1948 (76 years ago)
- NITTO KOHKI CO.,LTD.: 1956 (68 years ago)
- OLI SpA: 1961 (63 years ago)
Aerator Pump Manufacturers in United States
*Including some distributors, etc.
- Xylem Inc.
- WesTech Engineering, LLC.
- Coastal Hydraulics, Inc.
- SEPTIC SOLUTIONS, INC.
- Runnings, Inc.
- Pentair Aquatic Eco-Systems, Inc.
Global Distribution of Aerator Pump Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
6 | 40.0% |
Italy
|
3 | 20.0% |
Japan
|
3 | 20.0% |
United Kingdom
|
2 | 13.3% |
Denmark
|
1 | 6.7% |
